Specifications
Confirm model, interface type, rate, power, airflow and software version before ordering.
The LS-5130-28S-SI belongs to the H3C Ethernet switch portfolio. The existing material identifies Comware as its operating software and highlights a consistent command-line approach for configuration and operations. The previous title described a 24-port Gigabit configuration, but the body did not contain a complete model-level port table. That title alone is therefore not enough evidence for a bill of materials.
| Decision area | Required verification |
|---|---|
| Access and uplink ports | RJ45 count, SFP or SFP+ count, supported speeds and port combinations |
| Power | PoE capability, system power draw and power-supply format |
| Software | Comware release, Layer 2 and Layer 3 functions, and any license boundary |
| Deployment | Dimensions, airflow, stacking or virtualization support, and acoustic constraints |
Do not substitute another S5130 model solely because its name contains a similar port count. Compare the complete ordering code, uplink layout, switching and forwarding capacity, power design, software functions and lifecycle status. A replacement is suitable only after those items match the existing network requirements.
No. Provide the complete model and request the matching data sheet and front-panel diagram so similarly named variants are not confused.
The current source material does not reliably identify them at model level. Values from another member of the product family should not be copied into this record.
Evidence boundary: Use this page for initial screening. Confirm the final hardware revision and configuration against the model-specific manufacturer document supplied for the project.
Continue with the H3C switch catalog or use the enterprise IT buyer guide to prepare a verification request.
Confirm model, interface type, rate, power, airflow and software version before ordering.
Check the host server, switch fabric, firmware, slot, optics or cable and supported operating mode before ordering.
Share quantity, topology, deployment window, delivery region and replacement requirements for a practical recommendation.
Validate the representative host, peer device, driver, firmware and link media before a wider rollout.
Start with the required speed, interface, host platform and deployment role before comparing nearby models.
Confirm firmware, drivers, optics or cables, peer-device interoperability and the workload that matters to the project.
Provide the model, quantity, topology, target equipment, delivery region and required date so the next step is clear.
H3C LS-5130-28S-SI Switch: Product and Management Guide can be evaluated for H3C Switches projects, capacity expansion and replacement planning.
Confirm the host or switch model, slot, port mode, speed, firmware, operating system and the required cable or optic.
Use the intended peer device and workload to check link negotiation, driver or firmware behavior, throughput and stability.
Match the model to the required interface, rate, topology, software boundary, lifecycle and delivery schedule.
Compare the server or switch, port mode, speed, media, firmware and deployment environment; use a PoC when any boundary is uncertain.
Send the target model, quantity, existing equipment, link speed, distance, delivery date and replacement tolerance.